How To Build A Loft Bed - Easy, Step By Step Building Guide (2022)

How To Build A Loft Bed – Design and comfort do not have to be compromised when living in a tiny space. A bed is essential to every home. Knowing how to build a loft bed is a great way to keep your bedroom as spacious as possible. With a loft bed, the extra floor space available can be used to create a cozy sleeping area with ample storage for other furniture and knick-knacks [1]. Follow these step-by-step instructions to start your own DIY loft bed.

How To Build A Loft Bed
How To Build A Full-Size Loft Bed
Loft Beds For AdultsLoft Beds For Kids

How To Build A Loft Bed - Easy, Step By Step Building Guide (1)
How To Build A Loft Bed – Step 1: Materials

A meticulous project like a loft bed requires the right materials to ensure that the project goes smoothly with less cost and time. Get materials for your loft bed frame that will house your preferred mattress size. If you are feeling up to the challenge, you can opt to cut your own boards and posts.

Here are the following materials needed for a simple loft bunk bed[2]:

  • 1 – 4 x 8 x ¾ inch plywood
  • 4 – 4 x 4 inch at 8-ft length posts
  • 4 – 2 x 6 inch boards, 8 ft long
  • 6 – 2 x 2 inch, 8 ft long
  • Wrench
  • Drill
  • Level
  • Measuring Tape
  • Screwdriver
  • Nuts, lag bolts, and screws
  • Clamping device (optional)

How To Build A Loft Bed - Easy, Step By Step Building Guide (2)
How To Build A Loft Bed – Step 2: Measure the Ceiling Height

If the height of your ceiling is too low for a loft space or the height of your DIY loft bed isn’t measured correctly, you might end up installing the pieces in the wrong places.

Using your measuring tape, determine the loft area in which you want to install your DIY loft bed. Make sure you consider the size of the mattress that you intend to buy and the furniture that is going underneath the DIY loft bed. You can add stairs or a cute ladder on the side. You can also add shelves, a desk or storage below the loft bed frame[3].

How To Build A Loft Bed - Easy, Step By Step Building Guide (3)

How To Build A Loft Bed – Step 3: Construct the Loft Bed Frame

With the height of your loft space determined, it’s time to build your loft bed frame.

Cut or construct a box using four of the 2 x 6-inch boards.

Using a drill, create pilot holes in the boards in which the nuts and screws will go. Connect the planks with the nuts and lag bolts with your wrench.

Insert the plywood on top of the loft bed frame using drywall screws. This will serve as the base and support of the loft mattress. You can also opt to install slats using screws instead of plywood for the base[4].

How To Build A Loft Bed - Easy, Step By Step Building Guide (4)

How To Build A Loft Bed – Step 4: Attach Legs to the Bed Frame

Drill pilot holes into the bed frame and connect an 8 foot 4 x 4 inch post on each side using nuts. Remember to make sure the legs are all level before drilling. You can do this with optional clamping devices to keep the legs in place on the bed frame before you finalize your drill holes[5].

(Video) Loft Bed construction DIY - Build It Yourself 4K

How To Build A Loft Bed - Easy, Step By Step Building Guide (5)

How To Build A Loft Bed – Step 5: Attach The Rails

After firmly connecting the legs to the bed frame, attach the rails.

Stand the loft bunk bed upright. To secure the loft bed, connect the 2 x 2 inch boards across the legs using your drill and screws or lag bolts.

This will serve as rails, or stairs, leading to the mattress[6].

How To Build A Loft Bed
How To Build A Full-Size Loft Bed
Loft Beds For AdultsLoft Beds For Kids

How To Build A Loft Bed - Easy, Step By Step Building Guide (6)
How To Build A Full-Size Loft Bed

The step-by-step instructions above can be applied to a full-size loft bed with a few tweaks. The main difference between a full-size loft bed and a twin bed is the width. A full-size bed offers more space from side to side since a twin size bed is 39” x 75” and a full-size (double) bed is 54” x 75″. Using the above directions, you’ll need to add an additional 15 inches to the width. The length will stay the same.

It is important to be accurate when undertaking a large project such as this. If you plan to cut your wood, choose clean boards, and work on a level surface.

Level every board if necessary before installing screws to make sure they are straight and square. To hide the head of your screws, do a pre-drill, and countersink them. Wood glue can also be used to conceal[7].

Also, consider these ideas below to get the most from this “How To Build a Full-Size Loft Bed” tutorial:

Style

When you shop for the materials for your full-size loft bed, the big decisions come down to the materials and methods that you want to incorporate. Wood is the most popular choice for loft beds, but metal frames are also an option. It depends on the style and vibe that you want to achieve.

Durability

When it comes to durability, wood and metal are both trustworthy. Wood offers a vast array of colors, shapes, and sizes. It’s a little more complicated to work with if it’s not pre-cut but it guarantees a sturdy construction. Metal frames, on the other hand, provide a lightweight build and versatility. They can be painted, last a lifetime, and are easy to move and maintain.

(Video) Build it Yourself! Making a DIY LOFT BED with Work space for Small Room - Easy and Budget

Comfort

It’s crucial that your storage loft bed not only be durable and stylish but also comfortable. Whatever material you choose to use for your project, create loft bed plans that are compact and well-designed so there is no risk of toppling[8].

How To Build A Loft Bed
How To Build A Full-Size Loft Bed
Loft Beds For AdultsLoft Beds For Kids

How To Build A Loft Bed - Easy, Step By Step Building Guide (7)

Loft Beds For Adults

Loft beds for adults are currently trending since they can make a small home more spacious and accessible[9].

A home with a large ceiling is a perfect fit for a loft bed project with storage. It makes great use of the space above your bed, and loft beds can be custom made according to your needs. Put your loft bed on a platform, and leave the space underneath as storage space.

Place it anywhere in your home like beside a window, above a sitting area, next to your working desk or hang it from the ceiling with chains. The possibilities are endless[10].

How To Build A Loft Bed
How To Build A Full-Size Loft Bed
Loft Beds For AdultsLoft Beds For Kids

How To Build A Loft Bed - Easy, Step By Step Building Guide (8)

Loft Beds For Kids

A child’s loft bed plans are slightly different from those of an adult’s.

When building a loft bed for a child, consider their age, height, and daily activities. Bedrooms for children should be engaging, functional, and spacious, filled with happy colors.
Loft Bed with a Ladder or Slide
Kids have plenty of energy for playtime and fun, so a loft bed with a built-in slide or ladder is the perfect DIY loft. During the day, this loft area will inspire imagination and creativity[11]. Once nighttime comes, a slide provides a quick, easy, and safe way to get to the bathroom during the night.

Tools To Build A Loft Bed

  • Power drill
  • 4-inch bolts, washers, and nuts
  • 2×4 inch wood
  • Measuring tape
  • Wood screws
  • Pre-fabricated plastic slide

Build A Loft Bed For Kids – Step 1

  • Measure your child’s room to make sure you have enough room for a slide. Ensure that there is enough room between the bed and the wall to allow for a drop of a slide.
  • Measure the height of the bed or loft.
  • Make note of whether the bed can be adjusted to different slides.
  • Measure the height of the bed or loft. Make note of whether the bed can be adjusted to different slides.

According to the U.S. Consumer Product Safety Commission, a slide should not have a slope of more than 50 degrees and should have at least a 6-foot clearance at the bottom[12].

Build A Loft Bed For Kids – Step 2

Consider a preformed plastic slide as these are a safe option. They come in a variety of lengths and configurations and already built to regulations.

(Video) Build Your Kid's Dream Bed from 2x4's | DIY Loft Bed

Build A Loft Bed For Kids – Step 3

  • Make adjustments to conform to the appropriate slope. If you have a wooden bed, you can use extra lengths of 2×4’s to add height if needed.
  • Use a drill to make holes for the bolts. Bolt the pieces securely to the bed frame.

Build A Loft Bed For Kids – Step 4

  • Install the slide according to the manufacturer’s instructions. In general, you will use 2 smooth-headed bolts at the top of the slide.
  • Drill through the 2×4 to attach the bolts.
  • Tighten securely underneath the slide.

Build A Loft Bed For Kids – Step 5

Secure the slide to the floor with 2-inch wood screws. This step is necessary for the safety of your child and will cause minimal carpet damage.

Build A Loft Bed For Kids – Step 6

Apply pressure to the slide to ensure that it is secure. Instruct your child to use proper safety measures[13].

How To Build A Loft Bed
How To Build A Full-Size Loft Bed
Loft Beds For AdultsLoft Beds For Kids

How To Build A Loft Bed References
[1] Loft Style; Jessica Tolliver, 2002.
[2] How Stuff Works;How to Build a Loft Bed, April 22, 2011.
[3] Black And Decker; Build A Loft Bed, 2014.
[4] HGTV; How To Build A Loft Bed, November 25, 2014.
[5] Home Made Modern; Smart DIY Designs For A Stylish Home, Ben Uyeda, 2015.
[6] Colorado Mesa College; Bed Instructions.
[7] Loft Design;Solutions for Creating a Livable Space, Katherine Stone, 2005.
[8] Architectural Digest;8 Loft Bed Ideas for Your Small Bedroom, Elizabeth Stamp, October 26, 2017.
[9] HomeDit;Maximizing Space Since Their Clever Inception, Simona Ganea, February 18, 2016.
[10] Dwell;The Tiny Hollywood Home of Mad Men’s Vincent Kartheiser, Aaron Britt, October 21, 2013.
[11] Instructables; Loft Beds With Bookshelf Ladders, December 09, 2011.
[12] Hunker; How to Make a Slide for a Bunk Bed, Flora Richards-Gustafson.
[13] Do It Yourself;Kids’ Be Slide Setup Step-By-Step.

Summary

How To Build A Loft Bed - Easy, Step By Step Building Guide (9)

Article Name

How To Build A Loft Bed – Easy, Step By Step Building Guide

Description

[QUESTION] How to build a loft bed? [ANSER] The best way to build a loft bed is to follow our simple, detailed, step by step loft bed building instruction guide. This includes the materials, tools and directions.

Author

Sleep Team

Publisher Name

Tomorrow Sleep

Publisher Logo

(Video) DIY Loft Bed and Staircase Build With $Free.99 Plans

How To Build A Loft Bed - Easy, Step By Step Building Guide (10)

(Video) DIY Large Loft Bed Building Under $350 with Desk and Book Shelves | Time Lapse | Plus Build Plans

FAQs

How do you make a loft bed at home? ›

The table saw and then the planer before going on to the miter saw to cut the parts to length. Now

How do you build a loft? ›

And we'll start with a simple one here that I'm already drawn. And this one here will require a

How do you loft beds? ›

And lost the beds in your dorm. Room. Like this already only thing you need actually is a rubber

How long does it take to build a loft bed? ›

Believe it or not, you can build an awesome camp loft bed for just $50 in supplies. It's great for a tight space and the unique stairs give you more wall space. It only takes two hours to build. There's a complete shopping list, tool list, general instructions, diagrams, and color photos to help you build it.

Can u build a loft bed? ›

With the right tools, you can build a loft bed yourself. Good planning is essential for this project. The loft bed should be large enough to accommodate a full mattress. Consider cutting all the lumber one weekend and assembling the next.

How do you make an adult loft bed? ›

How to Build a Loft Bed for Adults (7 Steps)
  1. 1: Gather the Equipment and Materials.
  2. 2: Build the Suspended Headboard and Footboard.
  3. 3: Build the Long Suspended Side Rail.
  4. 4: Build the Shorter Suspended Side Rail.
  5. 5: Build the Ladder Support Frame.
  6. 6: Build and Secure the Ladder.
  7. 7: Secure the Bed and Add the Slat Sheet.

How do you make a floating loft bed? ›

Floating Loft Bed - YouTube

What is a loft room? ›

The word Loft by the dictionary means a room or space directly under the roof of a house or other building used for residential or commercial purposes. Another meaning of the word is a large, open area in a warehouse, factory or other large building that has been transformed into a living space.

How do you loft a bed in college? ›

How to loft a dorm bed at K-State (lower it to what they call ... - YouTube

How do you make a dorm room bunk bed? ›

Bunking, Unbunking, and Adjusting Beds - YouTube

How can I raise my bed without legs? ›

If your bed doesn't have a frame, you can't use bed risers, as they replace the platform legs or attach to them. Raising a bed without legs, such as a box spring bed, requires a mattress topper, foam wedge, or solid platform below the base mattress.

What size is a full bed? ›

Full Size Bed Dimensions. A Full size mattress is 54”W x 75” L. This size mattress may also be referred to as a “standard double.” For single active sleepers who like to sprawl out or couples who have a small bedroom, a Full size mattress may be suitable.

How tall are loft beds? ›

It is essential to have 33 to 36 inches of space between the top of the mattress and your ceiling, which means your ceiling should be about 100 inches high, four inches more than a traditional 8-foot ceiling.

How do you make a homemade bed frame? ›

DIY 5 Minutes Bed Frame - YouTube

How do you build a platform bed? ›

Easy DIY Bed Platform (with plans!) | How To Make - YouTube

How do you build a Murphy bed? ›

How to Build a Murphy Bed - YouTube

How can I make my bed like a hotel? ›

How to House: How to Make a Bed Like a Hotel | HGTV - YouTube

How do you raise a kids bed? ›

You can raise a bed by putting it directly on top of bookshelves or dressers, cinder blocks, or wooden pallets. You can use a lofting kit to lift your bed off of the ground and create storage space underneath, or you can use chains to hang your bed from the ceiling.

Can I use 2 box springs? ›

Although it's generally not recommended, if you are comfortable with the extra cost and height, or if you have an extra box spring lying around, you may want to stack two box springs on top of each other. In general, box springs cost more than regular bunkie boards or slats.

How much weight can a loft bed hold? ›

Typically, a loft bed holds 200 – 260 lbs of weight if it is designed for a twin mattress. The same is for a twin size bunk bed. Loft beds designed for higher weight limits can hold up to 600 lbs. Note that this weight includes the sleeper, the mattress, and any bedding.

How do I build a loft in my garage? ›

Shop Loft Build - How to Increase the Storage Space in Your Shop

How do you make a hanging bed? ›

How to make a hanging bed. Making a swinging bed that - YouTube

How do you make a floating twin bed? ›

DIY Floating Bed Frame - Build from 2x4's - YouTube

How much weight can a floating bed hold? ›

The weight capacity of a floating bed depends on the quality, construction finesse, and material durability. But an average queen-size floating bed is designed to withstand anywhere between 500 and 800 pounds.

Why is it called a loft? ›

The word 'loft' is thought to derive from Old Norse word 'lopt', meaning the upper chamber, upper region or sky, similar to the Old High German word 'luft', meaning air.

Can a bedroom be a loft? ›

But when it comes to being a bedroom, a converted loft room cannot be called a bedroom merely because it offers enough space to fit a bed in, or because one has been put in there: a loft needs to be converted for the purposes of being a sleeping area, and in accordance with building regulations, in order to be called a ...

What is loft type? ›

A loft is a living space made inside a former industrial building. Lofts feature open floor plans with concrete floors, high ceilings, and large windows for natural light. There are two types of lofts: hard and soft.

How do you make a bed in college? ›

Making a Clean and Comfortable College Bed - YouTube

How do I build a dorm loft? ›

To loft a dorm bed, get a lofting kit or bed risers, turn the bed frame on its side, and add extensions underneath the frame legs.

What is a lofting kit? ›

A loft kit allows you to raise your bed and maximize space in your residence hall room.

Can I lift my dorm bed? ›

If you have a bed with a slotted frame, you can simply take out the bed frame and move it up to the slot that you want. If you want to loft your bed and add a lot of extra space underneath, you'll need to borrow a lofting kit from your dorm and attach it to the bottom of your bed.

How do you climb off a bunk bed? ›

Some bunk beds can have stairs as a method for getting up to the top bunk. These will take up more floor space than a ladder, but can make climbing up and down easier. Use them as you would any other stairs until you reach the top stair, which should meet the top bunk. Then, all you have to do is crawl into bed.

How do I make my college bed bigger? ›

Invest in a deluxe mattress topper.

A durable and thick mattress pad will make a world of difference on your tiny dorm bed. Memory foam toppers that are over an inch thick are ideal (don't worry about getting a twin XL — a twin-sized mattress pad will work fine).

How do you use a bed lift? ›

You simply take the risers and, following the set instructions, place them underneath all four legs of your bed. We recommend grabbing a friend (or a new college roommate) to give you a hand – and always place your risers under the bed before placing your box spring and/or mattress on the bed frame.

How high can bed risers go? ›

Bed risers can add between 2 and 12 inches to the overall height of your bed. Your bed risers may be made of wood, plastic, rubber, or metal. There are three different types of bed risers: screw-in, stackable, and adjustable.

What sizes do bed risers come in? ›

Home-it Adjustable Bed Risers or Furniture Riser bed lifts in Heights of 8, 5 or 3 Inches Heavy Duty Set of 4 bed riser. Amazon's Choice highlights highly rated, well-priced products available to ship immediately.

How do you make an adult loft bed? ›

How to Build a Loft Bed for Adults (7 Steps)
  1. 1: Gather the Equipment and Materials.
  2. 2: Build the Suspended Headboard and Footboard.
  3. 3: Build the Long Suspended Side Rail.
  4. 4: Build the Shorter Suspended Side Rail.
  5. 5: Build the Ladder Support Frame.
  6. 6: Build and Secure the Ladder.
  7. 7: Secure the Bed and Add the Slat Sheet.

How do you make a bunk bed at home? ›

Easy Double Bunk Beds // Woodworking How To - YouTube

How do you make a floating loft bed? ›

Floating Loft Bed - YouTube

How do you make a homemade bed frame? ›

DIY 5 Minutes Bed Frame - YouTube

How much weight can a loft bed hold? ›

Typically, a loft bed holds 200 – 260 lbs of weight if it is designed for a twin mattress. The same is for a twin size bunk bed. Loft beds designed for higher weight limits can hold up to 600 lbs. Note that this weight includes the sleeper, the mattress, and any bedding.

How do you build a platform bed? ›

Easy DIY Bed Platform (with plans!) | How To Make - YouTube

How do you make a bed for kids? ›

How to Make Your Bed | So Easy Your Kids Can Do it Perfectly - YouTube

How do you make a doll bunk bed? ›

How to Make a Doll Bunk Bed | plus Desk - Doll Crafts - YouTube

How do you make a 2x4 bunk bed? ›

DIY Bunk Bed for about $100 or less 2x4 and 2x6 easy to build - YouTube

How do you make a hanging bed? ›

How to make a hanging bed. Making a swinging bed that - YouTube

How tall is a loft bed? ›

A typical high loft (or standard loft bed) is approximately 74.25 inches tall (about 6 ft 2 in).

How do you make a floating twin bed? ›

DIY Floating Bed Frame - Build from 2x4's - YouTube

How do you make a wooden bed frame step by step? ›

How to Make a Wooden Bed Frame | The Home Depot - YouTube

How can I make a simple bed at home? ›

Follow these steps when making your bed so that you get it right every time:
  1. Make sure everything is off. Start with a blank canvas – a.k.a a naked mattress. ...
  2. Put your fitted sheet on. ...
  3. Lay out the top sheet. ...
  4. Put your bedspread, duvet, or comforter on last. ...
  5. Add the pillows.
21 Jun 2018

How do you make a floating platform bed? ›

DIY "Floating" Platform Bed | first furniture build - YouTube

Videos

1. Assembling IKEA SMÅSTAD Loft Bed || Bunk Bed with Built in Desk
(VinFam)
2. DIY Bunk Bed. Easy, Strong, Inexpensive.
(Jay Bates)
3. Loft Bed Plans - How To Build A Loft Bed With Plans,Blueprints,Diagrams,Instructions And More
(Woodworking Plans)
4. How to build a loft bed with stairs #loftbed
(Poulton Project’s)
5. Building A Simple DIY Loft Bed
(Sawdust is Life)
6. DIY Low Loft Bed with Free Build Plans
(Ana White)

Top Articles

You might also like

Latest Posts

Article information

Author: Stevie Stamm

Last Updated: 09/24/2022

Views: 6016

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Stevie Stamm

Birthday: 1996-06-22

Address: Apt. 419 4200 Sipes Estate, East Delmerview, WY 05617

Phone: +342332224300

Job: Future Advertising Analyst

Hobby: Leather crafting, Puzzles, Leather crafting, scrapbook, Urban exploration, Cabaret, Skateboarding

Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.